When I connect via USB I get stm32 bootloader in Device manager , but no com ports . Is there any usb driver I need to install ?
I tried to connect via wifi and used the Pluto configurator 1.2.3, but could not connect . I am on win10. Is there any other version of pluto configurator that I can try ?
Hi,
We are aware of this bug. We have seen that this chrome app works well with macbooks. Let us know if you need anything to fix the bug, we will be greatful, if it is fixed.
Wifi connection is hit or miss on windows10 Chrome. Sometime it works sometimes does not .
As per my observation the Flight controller remains in DFU mode on connecting to laptop via USB. I have tried installing all the drivers .
SPRacing F3 Evo board shows up without issues on connecting via USB and goes into DFU mode only when trying to flash firmware from Clean flight. In ports it has a VCP/USB port open for MSP .
May that needs to be added/activated on Pluto Flight Controller .Kindly suggest
Hello!
I wanted to ask 2 things –
1. Can we configure Pluto 1.2?
2. @shally1986 How were you able to connect Pluto via Wifi on Windows PC? Is there any code that I need to upload on Pluto before configuring? My Pluto is simply not being detected in Windows 7 as well as Windows 10. Any resources in this regard would be very helpful.
Update:
I was able to connect the configurator with Pluto1.2. Could log data with it. Somehow CLI commands do not go through to Pluto. Any information in this regard would be helpful.
Yes your experience is similar to mine . It connects but does not work . When connect from usb it’s in STM boot mode (dfu). I used ez gui Android app . It’s works more or less
.
